Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 27624 | PAUL R. BRILES INC. DBA PB FASTENERS |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.564 INCHES NOMINAL FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ANEE | GRIP LENGTH | 2.678 INCHES MINIMUM AND 2.698 INCHES MAXIMUM |
| AASK | HEAD STYLE | SPLINE DRIVE SHEAR HEAD |
| AAUR | GRIP DIAMETER | 0.5610 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.146 INCHES MAXIMUM FIRST HOLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | 0.328 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 3.397 INCHES MINIMUM AND 3.444 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.562 INCHES |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAZH | HEAD MINOR DIAMETER | 0.908 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.725 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |